Hive Window and Door Contacts: Easy Installation and Usage
Posted on 19th June 2023
Hive Window and Door Contacts: Easy Installation and Usage
Are you looking for a security solution that is easy to install and use? Look no further than Hive window and door contacts. These contact sensors are designed to work with the Hive Hub, and they can be used to monitor any door or window in your home.
The installation process is quick and easy. Simply remove the battery tab, peel off the adhesive backing, and stick the sensor to the door or window. Once the sensor is in place, you can connect it to the Hive Hub using the included mini-USB cable.
Once the sensor is connected, you can use the Hive app to add it to your security system. The app will walk you through the process of adding the sensor to your system and configuring it to your preferences.
The Hive window and door contacts are powered by two AA batteries, and they will last for up to two years with normal use. If the batteries start to run low, you will receive a notification from the Hive app.
The Hive window and door contacts are compatible with the Hive Hub, Hive Active Heating, and Hive View. They can also be used with the Nest Thermostat E and the Nest Cam IQ.
If you are looking for an easy-to-use security solution, then Hive window and door contacts are the perfect choice for you.
Hive Window and Door Contacts: Easy Installation and Usage
If you have a Hive Hub, you can connect your window and door contacts to it and use the Hive app to monitor your home. Here’s a step-by-step guide to help you get started.
1. Open the Hive app and tap the Devices icon in the bottom right-hand corner.
2. Tap Add Device and select the Window or Door Contact from the list.
3. Follow the on-screen instructions to connect your device to the Hive Hub.
4. Once your device is connected, tap the device in the app to open the device details page.
5. Tap the pencil icon in the top right-hand corner to edit the device name and location.
6. Tap the check mark in the top right-hand corner to save your changes.
You can now use the app to monitor the status of your window or door. The app will also send you notifications if the contact is opened or closed.
If you have any questions about your window or door contact, please visit the Hive Help Center.
Assuming you have already placed your window and door contacts, the next step is to connect them to your security system. Most window and door contacts will have a built in reed switch. This is what tells the security system if the window or door is open or closed. The reed switch is usually located near the top of the contact. There are two wires coming out of the back of the contact. One is connected to the reed switch, and the other is connected to the terminals on the security system panel.
The wire coming from the reed switch is usually the negative wire. This wire will go to one of the ground terminals on the security system panel. The other wire coming from the contact is the positive wire. This wire will go to the terminal on the security system panel that is labeled “FL”. FL stands for “Form C” or “Form B”. This is the terminal that is used for door and window contacts.
After the wires are connected to the terminals on the security system panel, the next step is to enroll the contact into the system. This is how the security system knows which zone the contact is in. To enroll the contact, put the system into enrollment mode. This is usually done by pressing and holding the “program” or “*” button for a few seconds. Then press the “enroll” button. The system will usually make a beeping sound, and the LED will start flashing. At this point, open or close the window or door that has the contact. The security system should recognize the contact and enroll it into the system.
Once the contact is enrolled, it is ready to be used. To test the contact, open or close the window or door and see if the security system triggers the alarm. If the alarm does not sound, check the wiring to make sure the wires are connected to the correct terminals on the security system panel.
If you’re looking for a simple and effective way to improve the security of your home, then Hive Window and Door Contacts are a great option. They’re quick and easy to install, and they’re very affordable. In this article, we’ll take a look at how to install and use Hive Window and Door Contacts.
Installation
Hive Window and Door Contacts are very easy to install. Simply peel off the adhesive backings and stick the contacts to the top and bottom of your door or window frame. Once they’re in place, you’ll need to connect the contacts to your Hive Hub (sold separately).
Usage
Once your Hive Window and Door Contacts are installed, you’ll be able to use them with any of Hive’s security products. For example, you can set up an alert to be notified if a door or window is opened. You can also use the contacts to trigger a security camera to start recording.
Conclusion
Hive Window and Door Contacts are a great way to improve the security of your home. They’re quick and easy to install, and they’re very affordable. With Hive Window and Door Contacts, you can set up an alert to be notified if a door or window is opened, or you can use the contacts to trigger a security camera to start recording.
Hive Window and Door Contacts: Easy Installation and Usage
Hive’s window and door contacts are a great way to keep an eye on your home’s security. They’re easy to install and use, and they offer a variety of features that make them a great choice for any home.
Here are a few things to keep in mind when installing and using Hive window and door contacts:
1. Installation is quick and easy. Simply peel and stick the contact to the window or door frame, and then connect it to the Hive Hub (sold separately).
2. The contact is battery-powered, so there’s no need to worry about wiring.
3. The contact is compatible with a variety of Hive products, including the Hive Hub, Hive Camera, and Hive Sensor.
4. The contact can be used to trigger alerts, notifications, and automations. For example, you can set up an automation to turn on the lights when the door is opened, or to send a notification to your phone when the window is opened.
5. You can also use the contact to arm and disarm the Hive Hub’s security system.
6. The contact is backed by a 1-year warranty.
Hive’s window and door contacts are a great way to keep your home safe and secure. They’re easy to install and use, and they offer a variety of features that make them a great choice for any home.
